It’s a shame there isn’t a hygienic collar system to eject the dirt, as there is with some Dyson models.. VIEW PRICE.

Vacuum filters gradually collect a layer of dust.As the layer becomes thicker, the vacuum starts to.

lose suction and become less effective.If they aren’t cleaned, a clogged filter can eventually cause the vacuum to stop sucking altogether.. It’s hard to give specific advice in this section, as vacuum manufacturers have different recommendations for maintaining their filters.Check your manual to find out.

how often you should clean the filter(s).and whether they can be washed..

Many modern vacuum cleaners have a washable filter.

These are typically cleaned by tapping off any loose dust, then rinsing the filter under cold water.the Dyson V10’s Soft Roller brush bars.

It’s also important to remove the brush bar from the floorhead before you try to clear any obstructions.. To remove the brush bar, unlock the bar’s end cap using a coin.You should then be able to remove the end cap from the bar (the end cap should not be washed).. With the cap removed, you can then slide the brush bar out of the floorhead..

Step 2: Remove Obstructions And Wipe The Brush Bar.Now that the brush bar has been removed from the floorhead, it should be easy to find any potential obstructions.. For example, if there’s thick thread or hair caught around the brush bar, use a pair of scissors to carefully cut and remove it.